Read about how we modified a 20ft container into a 15ft cut down container for the owner of a busy convenience store, who was desperate for extra storage. Our customer wanted to place a container behind their Leeds-based premises, they required access via a rear personnel door straight into the container for stock overflow.
We had a very tight space to work with and a 20ft container would not fit, we therefore cut down a container to 15ft so that it could slot perfectly into the gap. The customer did not need the original cargo doors so they were removed and replaced with a blank steel wall. A roller shutter was installed which butts up perfectly to the personnel door. The unit was repainted and we are sure you will agree it looks fantastic.
Another happy customer, in fact don’t take our word for it, here’s what our customer said:
“The container, it’s perfect. Just a quick thank you for your advice, expertise and patience in helping to get it right”
15ft Cut Down Container Specification
Aperture
Cut aperture, surround with box section framework ready to install roller shutter
Roller Shutter
Install manual galvanised 1,500mm wide x 1,850mm high roller shutter, with the shutter to roll internally.
Painting
Paintwork blown in to best match original container colour
Blank end
Blank end to each 8ft end